Chapter 33 System
NXC5200 User’s Guide
482
Admin/User
Service Control
Admin Service Control specifies from which zones an administrator
can use HTTP to manage the NXC (using the Web Configurator). You
can also specify the IP addresses from which the administrators can
manage the NXC.
User Service Control specifies from which zones a user can use
HTTP to log into the NXC. You can also specify the IP addresses from
which the users can access the NXC.
Add
Click this to create a new entry. Select an entry and click Add to
create a new entry after the selected entry.
Edit
Double-click an entry or select it and click Edit to be able to modify
the entry’s settings.
Remove
To remove an entry, select it and click Remove. The NXC confirms
you want to remove it before doing so. Note that subsequent entries
move up by one when you take this action.
Move
To change an entry’s position in the numbered list, select the method
and click Move to display a field to type a number for where you
want to put it and press [ENTER] to move the rule to the number
that you typed.
#
This is the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the NXC’s (non-
configurable) default policy. The NXC applies this to traffic that does
not match any other configured rule. It is not an editable rule. To
apply other behavior, configure a rule that traffic will match so the
NXC will not have to use the default policy.
Zone
This is the zone on the NXC the user is allowed or denied to access.
Address
This is the object name of the IP address(es) with which the
computer is allowed or denied to access.
Action
This displays whether the computer with the IP address specified
above can access the NXC zone(s) configured in the Zone field
(Accept) or not (Deny).
Authentication
Client
Authentication
Method
Select a method the HTTPS or HTTP server uses to authenticate a
client.
You must have configured the authentication methods in the Auth.
method screen.
Apply
Click Apply to save your changes back to the NXC.
Reset
Click Reset to return the screen to its last-saved settings.
Table 184
Configuration > System > WWW > Service Control (continued)
LABEL
DESCRIPTION