Chapter 16 IP/MAC Binding
NXC5200 User’s Guide
237
16.2.2 Add/Edit Static DHCP Rule
Click Configuration > Network > IP/MAC Binding > Edit to open this screen.
Click the Add or Edit icon to open the following screen. Use this screen to
configure an interface’s IP to MAC address binding settings.
Figure 101
Configuration > Network > IP/MAC Binding > Edit > Add/Edit
The following table describes the labels in this screen.
Table 82
Configuration > Network > IP/MAC Binding > Edit > Add/Edit
LABEL
DESCRIPTION
Interface
Name
This field displays the name of the interface within the NXC and the
interface’s IP address and subnet mask.
IP Address
Enter the IP address that the NXC is to assign to a device with the entry’s
MAC address.
MAC Address
Enter the MAC address of the device to which the NXC assigns the entry’s
IP address.
Description
Enter up to 64 printable ASCII characters to help identify the entry. For
example, you may want to list the computer’s owner.
OK
Click OK to save your changes back to the NXC.
Cancel
Click Cancel to exit this screen without saving.