Chapter 3 The Web Configurator
NXC5200 User’s Guide
46
3.3.2.3 Configuration Menu
Use the configuration menu screens to configure the NXC’s features.
Table 6
Configuration Menu Screens Summary
FOLDER OR
LINK
TAB
FUNCTION
Licensing
Registration
Registration
Register the device and activate trial services.
Service
View the licensed service status and upgrade
licensed services.
Signature
Update
Anti-Virus
Update anti-virus signatures immediately or by a
schedule.
IDP/AppPatrol
Update IDP signatures immediately or by a
schedule.
System Protect
Update system-protect signatures immediately or
by a schedule.
Wireless
Controller
Configure how the NXC handles APs that newly
connect to the network.
AP
Management
Edit wireless AP information, remove APs, and
reboot them.
MON Mode
Configure how the NXC monitors for rogue APs.
Load
Balancing
Configure load balancing for traffic moving to and
from wireless clients.
DCS
Configure dynamic wireless channel selection.
Network
Interface
Ethernet
Manage Ethernet interfaces and virtual Ethernet
interfaces.
VLAN
Create and manage VLAN interfaces and virtual
VLAN interfaces.
Routing
Policy Route
Create and manage routing policies.
Static Route
Create and manage IP static routing information.
Zone
Configure zones used to define various policies.
NAT
Set up and manage port forwarding rules.
ALG
Configure SIP, H.323, and FTP pass-through
settings.
IP/MAC
Binding
Summary
Configure IP to MAC address bindings for devices
connected to each supported interface.
Exempt List
Configure ranges of IP addresses to which the NXC
does not apply IP/MAC binding.
Captive Portal
Captive Portal
Assign the captive portal web page to various
network services.
Login Page
Assign and customize the login page user’s see
when they hit the captive portal.