Chapter 1 Introduction
NXC5200 User’s Guide
26
Use a #2 Phillips screwdriver to install the screws.
Note: Failure to use the proper screws may damage the unit.
1.2.1 Rack-Mounted Installation Procedure
1
Align one bracket with the holes on one side of the NXC and secure it with the
included bracket screws (smaller than the rack-mounting screws).
2
Attach the other bracket in a similar fashion.
3
After attaching both mounting brackets, position the NXC in the rack by lining up
the holes in the brackets with the appropriate holes on the rack. Secure the NXC
to the rack with the rack-mounting screws.