Chapter 7 Monitor
NXC5200 User’s Guide
131
The following table describes the labels in this screen.
7.10 Radio List
Use this screen to view statistics about the wireless radio transmitters in each of
the APs connected to the NXC. To access this screen, click Monitor > Wireless >
AP Info > Radio List.
Figure 40
Monitor > Wireless > AP Info > Radio List
The following table describes the labels in this screen.
Table 38
Monitor > System Status > AP List > Station Count of AP
LABEL
DESCRIPTION
Station Count
The y-axis represents the number of connected stations.
Time
The x-axis shows the time over which a station was connected.
Last Update
This field displays the date and time the information in the window was
last updated.
Table 39
Monitor > Wireless > AP Info > Radio List
LABEL
DESCRIPTION
More
Information
Click this to view additional information about the selected radio’s
wireless traffic. Information spans a 24 hour period.
#
This is the radio’s index number in this list.
AP Description
This displays the description of the AP to which the radio belongs.
Model
This displays the model of the AP to which the radio belongs.
MAC Address
This displays the MAC address of the radio.
Radio
This indicates the radio number on the AP to which it belongs.
OP Mode
This indicates the radio’s operating mode. Operating modes are AP
(access point) or MON (monitor).
Profile
This indicates the profile name to which the radio belongs.
Frequency
This indicates the wireless frequency currently being used by the radio.
Channel ID
This indicates the radio’s channel ID.
Rx PKT
This displays the total number of packets received by the radio.
Tx PKT
This displays the total number of packets transmitted by the radio.