Chapter 1 Introduction
NXC5200 User’s Guide
31
1.3.3 Front Panel LEDs
This section describes the front panel LEDs.
Figure 6
NXC Front Panel - Configuration 3
The following table describes the LEDs.
1.4 Management Overview
You can use the following ways to manage the NXC.
Web Configurator
The Web Configurator allows easy NXC setup and management using an Internet
browser. This User’s Guide provides information about the Web Configurator.
Table 1
Front Panel LEDs
LED
COLOR
STATUS
DESCRIPTION
POWER
Off
The power module is turned off, not receiving power,
or not functioning.
Green
On
The power module is operating.
STATUS
Off
The NXC is turned off.
Green
On
The NXC is ready and operating normally.
Flashing
The NXC is self-testing.
Ethernet Link Amber
On
The port has a connected RJ-45 cable.
Flashing
The port is sending and receiving data.
Ethernet
Status
Green
On
The port is functioning at 10/100M speed.
Amber
On
The port is functioning at 1000M speed.
Fiber Link
Amber
On
The port has a connected fiber cable.
Ethernet
Status
Fiber 5 / 6
Link
Link
Fiber 7 / 8
Link