Chapter 25 AP Profile
NXC5200 User’s Guide
400
25.3.3.1 Add/Edit MAC Filter Profile
This screen allows you to create a new MAC filtering profile or edit an existing one.
To access this screen, click the Add button or select a MAC filter profile from the
list and click the Edit button.
Figure 179
SSID > MAC Filter List > Add/Edit MAC Filter Profile
The following table describes the labels in this screen.
Table 147
SSID > MAC Filter List > Add/Edit MAC Filter Profile
LABEL
DESCRIPTION
Profile Name
Enter up to 31 alphanumeric characters for the profile name. This name
is only visible in the Web Configurator and is only for management
purposes. Spaces and underscores are allowed.
Filter Action
Select allow to permit the wireless client with the MAC addresses in this
profile to connect to the network through the associated SSID; select
deny to block the wireless clients with the specified MAC addresses.
Add
Click this to add a MAC address to the profile’s list.
Edit
Click this to edit the selected MAC address in the profile’s list.
Remove
Click this to remove the selected MAC address from the profile’s list.
#
This field is a sequential value, and it is not associated with a specific
user.
MAC Address
This field specifies a MAC address associated with this profile.
Description
This field displays a description for the MAC address associated with this
profile. You can click the description to make it editable. Enter up to 60
characters, spaces and underscores allowed.