Appendix A Log Descriptions
NXC5200 User’s Guide
602
"SIM card of interface
cellular%d in %s is
locked. Please enter
PUK code to unlock.
The SIM card for the cellular device associated with the listed
cellular interface (%d) is locked. This may be because the PIN
code was entered incorrectly more than three times. You need
to enter the PUK code to unlock the SIM card. .
"Incorrect PIN code of
interface cellular%d.
Please check the PIN
code setting.
The listed cellular interface (%d) does has the wrong PIN
code configured.
"Unable to query the
signal quality from
the device in %s.
Please try to remove
then insert the
device.
The NXC could not check the signal strength for the listed
cellular interface (%d). This could be due to an error or being
out of range of the ISP’s cellular station.
"Interface cellular%d
cannot connect to the
service provider.
The listed cellular interface (%d) cannot connect to the ISP.
This could be due to an error or being out of range of the
ISP’s cellular station.
"Interface cellular%d
is configured with
incorrect APN.
The listed cellular interface (%d) does not have the correct
APN (Access Point Name) configured.
"Interface cellular%d
is configured with
incorrect phone
number.
The listed cellular interface (%d) does not have the correct
phone number configured.
"Interface cellular%d
is configured with
incorrect username or
password.
The listed cellular interface (%d) does not have the correct
user name and password configured.
"Interface cellular%d
is configured with
device %s, but current
inserted device is %s.
The listed cellular interface (%d) is configured for a particular
cellular device (first %s), but a different cellular device
(second %s) is inserted.
"Cellular device [%s
%s] has been inserted
into %s.
The cellular device (identified by its manufacturer and model)
has been inserted in or connected to the specified slot.
"Cellular device [%s
%s] has been removed
from %s.
The cellular device (identified by its manufacturer and model)
has been removed from the specified slot.
Interface cellular%d
required
authentication
password.Please set
password in cellular%d
edit page.
You need to manually enter the password for the listed
cellular interface (%d).
Table 229
Interface Logs (continued)
LOG MESSAGE
DESCRIPTION