Chapter 29 Schedules
NXC5200 User’s Guide
421
29.2.1 Add/Edit Schedule One-Time Rule
The Add/Edit Schedule One-Time Rule screen allows you to define a one-time
schedule or edit an existing one. To access this screen, go to the Schedule screen
and click either the Add icon or an Edit icon in the One Time section.
Figure 192
Configuration > Object > Schedule > Add/Edit (One-Time)
The following table describes the labels in this screen.
#
This field is a sequential value, and it is not associated with a specific
schedule.
Name
This field displays the name of the schedule, which is used to refer to the
schedule.
Start Time
This field displays the time at which the schedule begins.
Stop Time
This field displays the time at which the schedule ends.
Table 158
Configuration > Object > Schedule (continued)
LABEL
DESCRIPTION
Table 159
Configuration > Object > Schedule > Add/Edit (One-Time)
LABEL
DESCRIPTION
Configuration
Name
Type the name used to refer to the one-time schedule. You may use 1-
31 alphanumeric characters, underscores(
_
), or dashes (-), but the first
character cannot be a number. This value is case-sensitive.
Date Time
StartDate
Specify the year, month, and day when the schedule begins.
Year - 1900 - 2999
Month - 1 - 12
Day - 1 - 31 (it is not possible to specify illegal dates, such as February
31.)
Hour - 0 - 23
Minute - 0 - 59