Chapter 5 Tutorials
NXC5200 User’s Guide
77
4d
Under Member Configuration, set the ge1 Member status to Yes and TX
Tagging to Yes.
4e
Scroll down to IP Address Assignment and select Use Fixed IP Address.
4f
IP Address, enter 10.10.102.254.
4g
Subnet Mask: Enter 255.255.255.0.
4h
Gateway: Enter 10.10.102.254.
5
Click OK to save these changes.
After configuring VLANs 99, 101, and 102, the Configuration > Network >
Interfaces > VLAN screen should look similar to this:
Figure 21
Tutorial VLANs Summary
See Also:
.
5.2.4 Configure the AAA Object
This section shows you how to set up the AAA (Authentication, Authorization,
Accounting) server settings to allow registered users to log into the network
through the staff SSID.
1
Open the Configuration > Object > AAA Server > Active Directory screen
and then click the Add button.