Chapter 16 IP/MAC Binding
NXC5200 User’s Guide
234
16.1.2 What You Need to Know
The following terms and concepts may help as you read this chapter.
DHCP
IP/MAC address bindings are based on the NXC’s dynamic and static DHCP entries.
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding
with Ethernet, bridge, VLAN interfaces. You can also enable or disable IP/MAC
binding and logging in an interface’s configuration screen.
16.2 IP/MAC Binding Summary
Click Configuration > Network > IP/MAC Binding to open the IP/MAC
Binding Summary screen. This screen lists the total number of IP to MAC
address bindings for devices connected to each supported interface.
Figure 99
Configuration > Network > IP/MAC Binding > Summary