Chapter 18 Firewall
NXC5200 User’s Guide
263
18.3.1 Add/Edit Session Limit
Click Configuration > Firewall > Session Limit and the Add or Edit icon to
display the Firewall Session Limit Edit screen. Use this screen to configure
rules that define a session limit for specific users or addresses.
Figure 116
Configuration > Firewall > Session Limit > Add/Edit
The following table describes the labels in this screen.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
Move
To change a rule’s position in the numbered list, select the rule and click
Move to display a field to type a number for where you want to put that
rule and press [ENTER] to move the rule to the number that you typed.
The ordering of your rules is important as they are applied in order of
their numbering.
Status
This icon is lit when the entry is active and dimmed when the entry is
inactive.
#
This is the index number of a session limit rule. It is not associated with
a specific rule.
User
This is the user name or user group name to which this session limit rule
applies.
Address
This is the address object to which this session limit rule applies.
Limit
This is how many concurrent sessions this user or address is allowed to
have.
Apply
Click Apply to save your changes back to the NXC.
Reset
Click Reset to return the screen to its last-saved settings.
Table 94
Configuration > Firewall > Session Limit (continued)
LABEL
DESCRIPTION
Table 95
Configuration > Firewall > Session Limit > Add/Edit
LABEL
DESCRIPTION
Create new
Object
Use to configure any new settings objects that you need to use in this
screen.
Enable Rule
Select this check box to turn on this session limit rule.