Chapter 23 Device HA
NXC5200 User’s Guide
360
HA Status
The text before the slash shows whether the device is configured as the
master or the backup role.
This text after the slash displays the monitored interface’s status in the
virtual router.
Active - This interface is up and using the virtual IP address and subnet
mask.
Stand-By - This interface is a backup interface in the virtual router. It is
not using the virtual IP address and subnet mask.
Fault - This interface is not functioning in the virtual router right now. In
active-passive mode (or in legacy mode with link monitoring enabled), if
one of the master NXC’s interfaces loses its connection, the master NXC
forces all of its interfaces to the fault state so the backup NXC can take
over all of the master NXC’s functions.
Apply
Click Apply to save your changes back to the NXC.
Reset
Click Reset to return the screen to its last-saved settings.
Table 129
Configuration > Device HA > General (continued)
LABEL
DESCRIPTION