Appendix A Log Descriptions
NXC5200 User’s Guide
605
Table 233
File Manager Logs
LOG MESSAGE
DESCRIPTION
ERROR:#%s, %s
Apply configuration failed, this log will be what CLI command
is and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Apply configuration failed, this log will be what CLI command
is and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
ERROR:#%s, %s
Run script failed, this log will be what wrong CLI command is
and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Run script failed, this log will be what wrong CLI command is
and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Resetting system...
Before apply configuration file.
System resetted. Now
apply %s..
After the system reset, it started to apply the configuration
file.
%s is configuration file name.
Running %s...
An administrator ran the listed shell script.
%s is script file name.
Table 234
DHCP Logs
LOG MESSAGE
DESCRIPTION
Can't find any lease for
this client - %s, DHCP
pool full!
All of the IP addresses in the DHCP pool are already assigned
to DHCP clients, so there is no IP address to give to the listed
DHCP client.
DHCP server offered %s
to %s(%s)
The DHCP server feature gave the listed IP address to the
computer with the listed hostname and MAC address.
Requested %s from
%s(%s)
The NXC received a DHCP request for the specified IP address
from the computer with the listed hostname and MAC
address.
No applicable lease found
for DHCP request - %s !
There is no matching DHCP lease for a DHCP client’s request
for the specified IP address.
DHCP released %s with
%s(%s)
A DHCP client released the specified IP address. The DHCP
client’s hostname and MAC address are listed.