Chapter 4 Configuration Basics
NXC5200 User’s Guide
68
4.5.3 MON Profile
Use these screens to set up monitor mode configurations that allow your
connected APs to scan for other wireless devices in the vicinity.
4.6 System
This section introduces some of the management features in the NXC. Use Host
Name to configure the system and domain name for the NXC. Use Date/Time to
configure the current date, time, and time zone in the NXC. Use Console Speed
to set the console speed. Use Language to select a language for the Web
Configurator screens.
4.6.1 DNS, WWW, SSH, TELNET, FTP, and SNMP
Use these screens to set which services or protocols can be used to access the
NXC through which zone and from which addresses (address objects) the access
can come.
4.6.2 Logs and Reports
The NXC provides a system log, offers two e-mail profiles to which to send log
messages, and sends information to four syslog servers. It can also e-mail you
statistical reports on a daily basis.
Table 17
MON Profile Types
TYPE
ABILITIES
Monitor
Create monitor mode configurations that can be used by the APs to
periodically listen to a specified channel or number of channels for
other wireless devices broadcasting on the 802.11 frequencies.
MENU ITEM(S)
Configuration > System > DNS, WWW, SSH, TELNET, FTP,
SNMP, Language
PREREQUISITES
To-NXC firewall, zones, addresses, address groups, certificates (WWW,
SSH, FTP), authentication methods (WWW)
MENU ITEM(S)
Configuration > Log & Report