Chapter 12 Policy and Static Routes
NXC5200 User’s Guide
206
12.3 Static Route
Click Configuration > Network > Routing > Static Route to open the Static
Route screen. This screen displays the configured static routes.
Figure 83
Configuration > Network > Routing > Static Route
The following table describes the labels in this screen.
Table 71
Configuration > Network > Routing > Static Route
LABEL
DESCRIPTION
Add
Click this to create a new static route.
Edit
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Remove
To remove an entry, select it and click Remove. The NXC confirms you
want to remove it before doing so.
#
This is the number of an individual static route.
Destination
This is the destination IP address.
Subnet Mask
This is the IP subnet mask.
Next-Hop
This is the IP address of the next-hop gateway or the interface through
which the traffic is routed. The gateway is a router or switch on the same
segment as your NXC's interface(s). The gateway helps forward packets
to their destinations.
Metric
This is the route’s priority among the NXC’s routes. The smaller the
number, the higher priority the route has.