Chapter 5 Tutorials
NXC5200 User’s Guide
72
5.2 Sample Network Setup
This tutorial shows you how to create a wireless network that allows two types of
connections: staff and guest. Staff connections have full access to the network,
while guests are limited to Internet access (DNS, HTTP and HTTPS services).
Figure 19
Tutorial Network Topology
Requirements: A DHCP server with Option 138, an AD server, a switch that
supports 802.1q, a Layer-3 routing device and firewall.
Note: In this topology, vlan 199 is managed by the router responsible for the upstream
portion of the network, such as a ZyWALL.
The following VLAN settings are used in this tutorial:
Table 19
Tutorial Topology Summary
VLAN
VLAN ID
IP ADDRESS
Management
99
10.10.99.10/24
Staff
101
10.1.101.254/24
Guest
102
10.1.102.254/24