Chapter 5 Tutorials
NXC5200 User’s Guide
74
5.2.2 Set the Management VLAN (vlan99)
This section shows you how to set up the VLAN for managing the NXC. This is only
for network administrators to access the device.
1
Open the Configuration > Network > Interface > VLAN screen then click the
Add button.
2
The Add VLAN window opens.
2a
Enable Interface: Select this to enable this interface.
2b
Interface Name: Enter ‘vlan99’.
2c
VID: Enter ‘99’ as the VLAN ID tag.
2d
Under Member Configuration, set the ge1 Member status to Yes and TX
Tagging to Yes.