![background image](/i/zyxel/147956/zyxel-nxc5200/h/zyxel-nxc5200-087.png)
Chapter 5 Tutorials
NXC5200 User’s Guide
87
4
Click OK to save the firewall rule settings.
For example, to configure firewall rule #5:
1
Open the Configuration > Firewall screen and click the Add button.
2
The Add Firewall Rule window opens.
2a
User: Select guest1 from the list.
2b
Service: Select HTTPS from the list.
2c
Access: Select allow from the list.
3
Click OK to save these settings. The new firewall rule now appears in the Firewall
Rules Summary table.
Note: For the purposes of this tutorial, the firewall rules can be created in any order
just so long as they use the settings presented here.
See Also:
.
5.3 Blocking Network Protocols
The NXC’s firewall allows you to control which protocols are allowed on your
wireless network. If the NXC is connected to an upstream Internet access device,
then incoming traffic off the WAN should be filtered by that device’s firewall
feature. However traffic coming into the NXC from wireless clients is not filtered
until you configure its own firewall first.
5.3.1 Configuring the WLAN Zone
This section shows you how to configure the WLAN zone, which is necessary for
implementing the firewall rules and Application Patrol rules.
1
Open the Configuration > Network > Zone screen.
2
Select WLAN from the User Configuration table and click the Edit button.