DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
103
rst
- (Optional) Specifies to reset the connection.
syn
- (Optional) Specifies to synchronize sequence numbers.
fin
- (Optional) No more data from sender.
udp
- Specifies that the rule applies to UDP traffic.
src_port_mask
- (Optional) Specifies the UDP source port mask.
<hex 0x0-0xffff>
- Specifies the UDP source port mask.
dst_port_mask
- (Optional) Specifies the UDP destination port mask.
<hex 0x0-0xffff>
- Specifies the UDP destination port mask.
protocol_id_mask
- Specifies that the rule applies to the IP protocol ID traffic.
<hex 0x0-0xff>
- Specifies that the rule applies to the IP protocol ID traffic.
user_define_mask
- (Optional) Specifies the L4 part mask
<hex 0x0-0xffffffff>
- Specifies the L4 part mask
packet_content_mask
- Specifies the packet content mask.
offset_0-15
- Specifies the mask for packet bytes 0-15.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 0-3.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 4-7.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 8-11.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 12-15.
offset_16-31
- Specifies the mask for packet bytes 16-31.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 16-19.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 20-23.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 24-27.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 28-31.
offset_32-47
- Specifies the mask for packet bytes 32-47
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 32-35.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 36-39.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 40-43.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 44-47.
offset_48-63
- Specifies the mask for packet bytes 48-63.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 48-51.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 52-55.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 56-59.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 60-63.
offset_64-79
- Specifies the mask for packet bytes 64-79.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 64-67.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 68-71.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 72-75.
<hex 0x0-0xffffffff>
- Specifies the mask for packet bytes 76-79.
ipv6
- Specifies the IPv6 mask.
class
- Specifies the IPv6 class mask.
flowlabel
- Specifies the IPv6 flow label mask.
source_ipv6_mask
- Specifies the IPv6 source IP mask.
<ipv6mask>
- Specifies the IPv6 source IP mask.
destination_ipv6_mask
- Specifies the IPv6 destination IP mask.
<ipv6mask>
- Specifies the IPv6 destination IP mask.
Restrictions
Only Administrator and Operator-level users can issue this command. The Switch supports a
maximum of five CPU profiles to be configured.
Example
To create CPU access list profiles:
DGS-3710-12C:admin#create cpu access_profile profile_id 1 ethernet vlan
Command: create cpu access_profile profile_id 1 ethernet vlan