DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
145
Example
To display the CFM configuration:
DGS-3710-12C:admin#show cfm
Command: show cfm
CFM State: Enabled
Level MD Name
----- ------------------
2 op_domain
DGS-3710-12C:admin#
12-17
show cfm fault
Description
This command is used to display all the fault conditions detected by the MEPs contained in the
specified MA or MD. The display provides the overview of the fault status by MEPs.
Format
show cfm fault {md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> |
ma_index <uint 1-4294967295>]}}
Parameters
md
- (Optional) Specifies the maintenance domain name.
<string 22>
- Specifies the maintenance domain name. The maximum length is 22
characters.
md_index
- Specifies the maintenance domain index.
<uint 1-4294967295>
- Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma
- (Optional) Specifies the maintenance association name.
<string 22>
- Specifies the maintenance association name. The maximum length is 22
characters.
ma_index
- Specifies the maintenance association index.
<uint 1-4294967295>
- Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
Restrictions
None.
Example
To display the MEPs that have faults: