DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
381
36-17
show lldp local_ports
Description
This command is used to display the per-port information currently available for populating
outbound LLDP advertisements.
Format
show lldp local ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist>
- (Optional) Specifies the ports to be displayed. When a port list is not specified,
information for all ports will be displayed.
mode
- (Optional) Select the mode: brief, normal, or detailed.
brief
- Specifies to display the information in brief mode.
normal
- Specifies to display the information in normal mode. This is the default display mode.
detailed
- Specifies to display the information in detailed mode.
Restrictions
None.
Example
To display LLDP local port information for port 1:
DGS-3710-12C:admin#show lldp local_ports 1
Command: show lldp local_ports 1
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : MAC Address
Port ID : F0-7D-68-25-CB-41
Port Description : D-Link DGS-3710-12C R1.00.029 P
ort 1 on Unit 1
Port PVID : 1
Management Address Count : 1
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
DGS-3710-12C:admin#