DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
77
SSH default default
HTTP default default
DGS-3710-12C:admin#
5-14
create authen server_group
Description
This command is used to create a user-defined authentication server group. The maximum
supported number of server groups including built-in server groups is eight. Each group consists of
eight server hosts as maximum.
Format
create authen server_group <string 15>
Parameters
<string 15>
- Specifies the user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined authentication server group:
DGS-3710-12C:admin#create authen server_group mix_1
Command: create authen server_group mix_1
Success.
DGS-3710-12C:admin#
5-15
config authen server_group
Description
This command is used to add or remove an authentication server host to or from the specified
server group. Built-in server group tacacs, xtacacs, tacacs+, and RADIUS accept the server host
with the same protocol only, but user-defined server group can accept server hosts with different
protocols. The server host must be created first by using the CLI command
create authen
server_host
.
Format
config authen server_group [tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete]
server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]