DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
461
45-9
enable stp
Description
Although it is possible to modify to allow a user to enable STP per instance, CIST should be
enabled first before enabling other instances. When a user enables the CIST, all MSTIs will be
enabled automatically if FORCE_VERSION is set to MSTP and there is at least one VLAN
mapped to this instance.
Format
enable stp
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable STP:
DGS-3710-12C:admin#enable stp
Command: enable stp
Success.
DGS-3710-12C:admin#
45-10
disable stp
Description
This command is used to disable STP functionality in every existing instance.
Format
disable stp
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable STP: