DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
708
Format
show wac auth_state ports {<portlist>}
Parameters
<portlist>
- (Optional) Specifies the list of ports whose WAC authentication state will be
displayed.
Restrictions
None.
Example
To display the WAC authentication status of ports 2 to 4:
DGS-3710-12C:admin#show wac auth_state ports 2-4
Command: show wac auth_state ports 2-4
Port MAC Address P:Port-based Pri: Priority
Port MAC Address Original State VID Pri Aging Time/ Idle
RX VID Block Time
Time
------ -------------------- ---- -------------- ---- -- ----------- ----
1 00-00-00-00-00-01 20 Authenticated - 3 Infinite 40
1 00-00-00-00-00-02 20 Authenticated 1234 - Infinite 50
1 00-00-00-00-00-03 100 Blocked - - 60 -
1 00-00-00-00-00-04 110 Authenticating - - 10 -
2 00-00-00-00-00-10(P) 2040 Authenticated 1234 2 1440 20
3 00-00-00-00-00-20(P) 2045 Authenticating - - 5 -
3 00-00-00-00-00-21 2041 Blocked - 6 1100 80
Total Authenticating Hosts :2
Total Authenticated Hosts :3
Total Blocked Hosts :2
DGS-3710-12C:admin#
74-17
clear wac auth_state
Description
This command is used to clear the authentication state of a port. The port will return to un-
authenticated state. All the timers associated with the port will be reset.
Format
clear wac auth_state [ports [<portlist> | all] {authenticated | authenticating | blocked} |
macaddr <macaddr>]