DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
678
Parameters
<portlist>
- (Optional) Specifies a range of ports for which you want to display VLAN. The
beginning and end of the port list range are separated by a dash.
Restrictions
None.
Example
To display VLAN port settings:
DGS-3710-12C:admin#show vlan ports 1-2
Command: show vlan ports 1-2
Port VID Untagged Tagged Dynamic Forbidden
------ ----- -------- ------ ------- ---------
1 1 X - - -
2 1 X - - -
DGS-3710-12C:admin#
72-15
show gvrp
Description
This command is used to display the GVRP status for the switch.
Format
show gvrp
Parameters
None.
Restrictions
None.
Example
To display the GVRP status of the switch: