DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
634
Format
config vlan_precedence ports <portlist> [mac_based_vlan | subnet_vlan]
Parameters
<portlist>
- Enter a list of ports used for this configuration here.
mac_based_vlan
- Specifies that the MAC-based VLAN classification is precedence than subnet
VLAN classification
subnet_vlan
- Specifies that the subnet VLAN classification is precedence than MAC-based
VLAN classification
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure subnet VLAN classification precedence on port 1:
DGS-3710-12C:admin# config vlan_precedence ports 1 subnet_vlan
Command: config vlan_precedence ports 1 subnet_vlan
Success.
DGS-3710-12C:admin#
64-5
show vlan_precedence ports
Description
This command is used to display the VLAN classification precedence.
Format
show vlan_precedence ports {<portlist>}
Parameters
<portlist>
- (Optional) Specifies the list of ports used for this display.
Restrictions
None.
Example
To display VLAN classification precedence on ports 1-5: