DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
168
multi_authen_methods
- Specifies the method for compound authentication.
none
- Specifies that compound authentication is not enabled.
any
- Specifies if any of the authentication methods (802.1X, MAC, and JWAC/WAC) pass,
then pass.
dot1x_impb
- Dot1X will be verified first, and then IMPB will be verified. Both authentications
need to be passed.
impb_wac
- WAC will be verified first, and then IMPB will be verified. Both authentications
need to be passed.
mac_impb
- IMPB will be verified first, and then MAC be verified. Both authentications need
to be passed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
The following example sets the authentication mode of all ports to host-based:
DGS-3710-12C:admin#config authentication ports all auth_mode host_based
Command: config authentication ports all auth_mode host_based
Success.
DGS-3710-12C:admin#
The following example sets the compound authentication method of all ports to “any”:
DGS-3710-12C:admin#config authentication ports all multi_authen_methods any
Command: config authentication ports all multi_authen_methods any
Success.
DGS-3710-12C:admin#
15-5
show authentication
Description
This command is used to display the global authentication configuration.
Format
show authentication
Parameters
None.
Restrictions
None.