DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
527
disable
- Specifies that the EEE function will be disabled on the special port.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the EEE function on special port(s) on the Switch:
DGS-3710-12C:admin#config eee ports 2-5 state enable
Command: config eee ports 2-5 state enable
Success.
DGS-3710-12C:admin#
51-4
show eee ports
Description
This command is used to display the EEE function state on the special port(s).
Format
show eee ports {<portlist>}
Parameters
<portlist>
- (Optional) Enter the list of ports used, for this display, here.
If no parameter is specified, then all information will be displayed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display the EEE settings: