DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
705
DGS-3710-12C:admin#delete wac user duhon
Command: delete wac user duhon
Success.
DGS-3710-12C:admin#
74-12
config wac user
Description
This command is used to change the VLAN associated with a user.
Format
config wac user <username 15> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> | clear_vlan]
Parameters
<username 15>
- Specifies the name of user account which will change its VID.
vlan
- Specifies the authentication VLAN name.
<vlan_name 32>
- Specifies the authentication VLAN name. The VLAN name can be up to 32
characters long.
vlanid
- Specifies the authentication VLAN ID.
<vlanid 1-4094>
- Specifies the authentication VLAN ID. The VLAN ID must be between 1
and 4094.
clear_vlan
- Specifies to clear the specified VLAN.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the user’s VLAN:
DGS-3710-12C:admin# config wac user abc vlanid 100
Command: config wac user abc vlanid 100
Enter a old password:**
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
DGS-3710-12C:admin#
74-13
show wac
Description
This command is used to display the WAC global setting.