DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
328
30-18
config address_binding dhcp_snoop max_entry ports
Description
This command is used to specifiy the maximum number of entries which can be learned by the
specified ports. By default, the per port maximum entry is no limit.
Format
config address_binding dhcp_snoop max_entry ports [<portlist> | all] limit [<value 1-50> |
no_limit] {ipv6}
Parameters
<portlist>
- Specifies the list of ports to configure maximum number of entries.
all
- Specifies all the ports to configure maximum number of entries.
limit
- Specifies the maximum number of entries which can be learned by the specified ports.
<value 1-50>
- Specifies a maximum limit between 1 and 50.
no_limit
- Specifies an unlimited number of entries.
ipv6
– (Optional) Specifies that the configuration is for IPv6 DHCP Snooping.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To set the maximum number of entries that ports 1 to 3 can learn to 10:
DGS-3710-12C:admin#config address_binding dhcp_snoop max_entry ports 1-3 limit
10
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10
Success.
DGS-3710-12C:admin#
30-19
config address_binding recover_learning ports
Description
This command is used to recover port learning.
Format
config address_binding recover_learning ports [<portlist> | all]
Parameters
<portlist>
- Specifies the list of ports to recover learning.
all
- Specifies to recover learning for all ports.