DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
425
Example
To unset ports 9 to 10 from MLD Snooping static member ports for group FF1E::1 on default VLAN:
DGS-3710-12C:admin#config mld_snooping static_group vlan default FF1E::1 delete
9-10
Command: config mld_snooping static_group vlan default FF1E::1 delete 9-10
Success.
DGS-3710-12C:admin#
42-9
delete mld_snooping static_group
Description
This command is used to delete an MLD snooping static group on the switch. The deletion of an
MLD snooping static group will not affect the MLD snooping dynamic member ports for a group.
Format
delete mld_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>
Parameters
vlan
- Specifies the name of the VLAN on which the static group resides.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- Specifies the ID of the VLAN on which the static group resides.
<vlanid_list>
- Specifies the VLAN ID list.
<ipv6addr>
- Specifies the multicast group IPv6 address (for Layer 3 switch).
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an MLD snooping static group from the default VLAN, group FF1E::1:
DGS-3710-12C:admin#delete mld_snooping static_group vlan default FF1E::1
Command: delete mld_snooping static_group vlan default FF1E::1
Success.
DGS-3710-12C:admin#
42-10
show mld_snooping static_group
Description
This command is used to display the MLD snooping static groups.