DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
27
DGS-3710-12C:admin#clear
Command: clear
2-26
config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
default
- Specifies the default terminal width value.
<value 80-200>
-
Specifies a terminal width value between 80 and 200 characters. The default
value is 80.
Restrictions
None.
Example
To configure the terminal width:
DGS-3710-12C:admin#config terminal width 90
Command: config terminal width 90
Success.
DGS-3710-12C:admin#
2-27
show terminal width
Description
This command is used to display the configuration of the current terminal width.
Format
show terminal width
Parameters
None.