DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
78
Parameters
tacacs
- Specifies the built-in server group TACACS.
xtacacs
- Specifies the built-in server group XTACACS.
tacacs+
- Specifies the built-in server group TACACS+.
radius
– Specifies the built-in server group RADIUS.
<string 15>
- Specifies a user-defined server group.
add
- Specifies to add a server host to a server group.
delete
- Specifies to remove a server host from a server group.
server_host
- Specifies the server host’s IP address.
<ipaddr>
- Specifies the server host’s IP address.
protocol
- Specifies the server host’s type of authentication protocol.
tacacs
- Specifies the server host’s authentication protocol TACACS.
xtacacs
- Specifies the server host’s authentication protocol XTACACS.
tacacs+
- Specifies the server host’s authentication protocol TACACS+.
radius
- Specifies the server host’s authentication protocol RADIUS.
Restrictions
Only Administrator-level users can issue this command.
Example
To add an authentication server host to a server group:
DGS-3710-12C:admin#config authen server_group mix_1 add server_host 10.1.1.222
protocol tacacs+
Command: config authen server_group mix_1 add server_host 10.1.1.222 protocol
tacacs+
Success.
DGS-3710-12C:admin#
5-16
delete authen server_group
Description
This command is used to delete a user-defined authentication server group.
Format
delete authen server_group <string 15>
Parameters
<string 15>
- Specifies the user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a user-defined authentication server group: