DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
165
Chapter 15
Compound
Authentication
Commands
create authentication guest_vlan
[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
delete authentication guest_vlan
[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
config authentication guest_vlan
[vlan <vlan_name 32> | vlanid <vlanid 1-4094>] [add | delete]
ports [<portlist> | all ]
config authentication ports
[<portlist> | all] {auth_mode [port_based | host_based] |
multi_authen_methods [none | any | dot1x_impb | impb_wac | mac_impb]}(1)
show authentication
show authentication guest_vlan
show authentication ports
{<portlist>}
enable authorization attributes
disable authorization attributes
show authorization
config authentication server failover
[local | permit | block]
15-1
create authentication guest_vlan
Description
This command is used to assign a static VLAN to be a guest VLAN. The specific VLAN which is
assigned to be a guest VLAN must already exist. The specific VLAN which is assigned to be a
guest VLAN can’t be deleted.
For further description of this command, please see the description for
config authentication
guest_vlan ports
.
Format
create authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Parameters
vlan
- Specifies the guest VLAN by VLAN name.
<vlan_name 32>
- Specifies the guest VLAN by VLAN name. The VLAN name can be up to
32 characters long.
vlanid
- Specifies the guest VLAN by VLAN ID.
<vlanid 1-4094>
- Specifies the guest VLAN by VLAN ID. The VLAN ID value must be
between 1 and 4094.
Restrictions
Only Administrator and Operator-level users can issue this command.