DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
378
Parameters
<portlist>
- Specifies a range of ports to be displayed.
Note:
When a port list is not specified, information for all ports will be displayed.
Restrictions
None.
Example
To display LLDP-MED information currently available for populating outbound LLDP-MED
advertisements for port 1:
DGS-3710-12C:admin#show lldp_med local_ports 1
Command: show lldp_med local_ports 1
Port ID : 1
----------------------------------------------------------------
LLDP-MED Capabilities Support:
Capabilities :Support
Network Policy :Support
Location Identification :Not Support
Extended Power Via MDI PSE :Not Support
Extended Power Via MDI PD :Not Support
Inventory :Support
Network Policy:
Application Type : Voice
VLAN ID : 100
Priority : 7
DSCP : 0
Unknown : False
Tagged : True
DGS-3710-12C:admin#
36-16
show lldp_med remote_ports
Description
This command is used to display LLDP-MED information learned from neighbors.
Format
show lldp_med remote_ ports {<portlist>}