DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
67
Chapter 5
Access Authentication
Control (AAC)
Commands
enable authen_policy
disable authen_policy
show authen_policy
create authen_login method_list_name
<string 15>
config authen_login
[default | method_list_name <string 15>] method {tacacs | xtacacs | tacacs+
| radius | server_group <string 15> | local | none}(1)
delete authen_login method_list_name
<string 15>
show authen_login
[default | method_list_name <string 15> | all]
create authen_enable method_list_name
<string 15>
config authen_enable
[default | method_list_name <string 15>] method {tacacs | xtacacs |
tacacs+ | radius | server_group <string 15> | local_enable | none}(1)
delete authen_enable method_list_name
<string 15>
show authen_enable
[default | method_list_name <string 15> | all]
config authen application
[console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
show authen application
create authen server_group
<string 15>
config authen server_group
[tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete]
server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
delete authen server_group
<string 15>
show authen server_group
{<string 15>}
create authen server_host
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-
65535> | key [<key_string 254> | none] | timeout <int 1-255> | retransmit <int 1-20>}
config authen server_host
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-
65535> | key [<key_string 254> | none] | timeout <int 1-255> | retransmit <int 1-20>}(1)
delete authen server_host
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
show authen server_host
config authen parameter response_timeout
<int 0-255>
config authen parameter attempt
<int 1-255>
show authen parameter
enable admin
config admin local_enable
5-1
enable authen_policy
Description
This command is used to enable system access authentication policy. When enabled, the device
will adopt the login authentication method list to authenticate the user for login, and adopt the
enable authentication mothod list to authenticate the enable password for promoting the user‘s
privilege to Administrator level.
Format
enable authen_policy