DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
117
made, resides on.
<ipif_name 12>
- Specifies the IP interface name. The maximum length is 12 characters.
ipaddress
- The IP address of the end node or station.
<ipaddr>
- Specifies the IP address.
static
- Displays the static entries to the ARP table.
mac_address
- Displays the ARP entry by MAC address.
<macaddr>
- Specifies the MAC address.
Note:
If no parameter is specified, all ARP entries will be displayed.
Restrictions
None.
Example
To display the ARP table:
DGS-3710-12C:admin# show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.90.90.90 00-01-02-03-04-00 Local
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Total Entries: 3
DGS-3710-12C:admin#
7-6
clear arptable
Description
This command is used to remove dynamic entries from the ARP table. Static ARP entries are not
affected.
Format
clear arptable
Parameters
None.