DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
534
Format
show port dot1v {ports <portlist>}
Parameters
ports
- (Optional) Specifies a range of ports to be displayed.
<portlist>
- Specifies a range of ports to be displayed.
Note:
If no parameter is specified, information for all ports will be displayed.
Restrictions
None.
Example
To display the protocol VLAN information for ports 2 to 5:
DGS-3710-12C:admin#show port dot1v ports 2-5
Command: show port dot1v ports 2-5
Port: 2
Protocol Group ID Protocol Group Name VLAN Name Protocol
Priority
----------------- ------------------------------- ---------------- --------
1 dot1 default -
Port: 3
Protocol Group ID Protocol Group Name VLAN Name Protocol
Priority
----------------- ------------------------------- ---------------- --------
1 dot1 default -
Port: 4
Protocol Group ID Protocol Group Name VLAN Name Protocol
Priority
----------------- ------------------------------- ---------------- --------
1 dot1 default -
Port: 5
Protocol Group ID Protocol Group Name VLAN Name Protocol
Priority
----------------- ------------------------------- ---------------- --------
1 dot1 default -
Total Entries: 4
DGS-3710-12C:admin#