DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
371
DGS-3710-12C:admin#config lldp ports 1-5 admin_status tx_and_rx
Command: config lldp ports 1-5 admin_status tx_and_rx
Success.
DGS-3710-12C:admin#
To enable ports 1 to 5 to manage address entries:
DGS-3710-12C:admin#config lldp ports 1-5 mgt_addr ipv4 192.168.254.10 enable
Command: config lldp ports 1-5 mgt_addr ipv4 192.168.254.10 enable
Success.
DGS-3710-12C:admin#
To exclude the system name TLV from the outbound LLDP advertisements for all ports:
DGS-3710-12C:admin#config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
DGS-3710-12C:admin#
To exclude the PVID TLV from the outbound LLDP advertisements for all ports:
DGS-3710-12C:admin#config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DGS-3710-12C:admin#
To exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements for ports 1
to 3:
DGS-3710-12C:admin#config lldp ports 1-3 dot1_tlv_protocol_vid vlan all enable
Command: config lldp ports 1-3 dot1_tlv_protocol_vid vlan all enable
Success.
DGS-3710-12C:admin#
To exclude the VLAN name TLV from the outbound LLDP advertisements for ports 1 to 3:
DGS-3710-12C:admin#config lldp ports 1-3 dot1_tlv_vlan_name vlan all enable
Command: config lldp ports 1-3 dot1_tlv_vlan_name vlan all enable
Success.
DGS-3710-12C:admin#