DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
214
19-3
show dhcp excluded_address
Description
This command is used to display the groups of IP addresses which are excluded from being a
legal assigned IP address.
Format
show dhcp excluded_address
Parameters
None.
Restrictions
None.
Example
To display the DHCP server excluded addresses:
DGS-3710-12C:admin#show dhcp excluded_address
Command: show dhcp excluded_address
Index Begin Address End Address
----- ------------- --------------
1 192.168.0.1 192.168.0.100
2 10.10.10.10 10.10.10.11
Total Entries : 2
DGS-3710-12C:admin#
19-4
create dhcp pool
Description
This command is used to create a DHCP pool by specifying a name. After creating a DHCP pool,
use other DHCP pool configuration commands to configure parameters for the pool.
Format
create dhcp pool <pool_name 12>
Parameters
<pool_name 12>
- Specifies the name of the DHCP pool.