![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-668.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
664
Example
To trace the routed path between the switch and 10.48.74.121:
DGS-3710-12C:admin#traceroute 10.48.74.121 probe 3
Command: traceroute 10.48.74.121 probe 3
1 <10 ms. 10.12.73.254
2 <10 ms. 10.19.68.1
3 <10 ms. 10.48.74.121
Trace complete.
DGS-3710-12C:admin#
71-8
traceroute6
Description
This command is used to trace the IPv6 routed path between the Switch and a destination end
station.
Format
traceroute6 <ipv6addr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec 1-65535>
| probe <value 1-9>}
Parameters
<ipv6addr>
- Specify the IPv6 address of the destination end station.
ttl
- (Optional) Specify the time to live value of the trace route request.
<value 1-60>
- Specify the time to live value of the trace route request. This is the maximum
number of routers that a trace route packet can pass while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops. The default value is 30.
port
- (Optional) Specify the port number.
<value 30000-649000>
- Specify the port number. The value range is from 30000 to 64900.
The default is 33435.
timeout
-
(Optional) Specify the timeout period while waiting for a response from the remote
device.
<sec 1-65535>
- Specify the timeout period while waiting for a response from the remote
device. A value of 1 to 65535 seconds can be specified. The default is 5 seconds.
probe
– (Optional)
Specify the number of probes.
<value 1-9>
- Specify the number of probes. The range is from 1 to 9. If unspecified, the
default value is 1.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Trace the IPv6 routed path between the switch and 3000::1:
DGS-3710-12C:admin# traceroute6 3000::1 probe 3
Command: traceroute6 3000::1 probe 3