DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
382
36-18
show lldp mgt_addr
Description
This command is used to display the LLDP management address.
Format
show lldp mgmt_addr {[ipv4 <ipaddr> | ipv6 <ipv6addr>]}
Parameters
ipv4
- (Optional) Specifies the IPv4 address of the LLDP managament address entry.
<ipaddr>
- Specifies the IPv4 address of the LLDP managament address entry.
ipv6
- (Optional) Specifies the IPv6 address of the LLDP managament address entry.
<ipv6addr>
- Specifies the IPv6 address of the LLDP managament address entry.
Restrictions
None.
Example
To display the LLDP management address:
DGS-3710-12C:admin#show lldp mgt_addr
Command: show lldp mgt_addr
Address 1 :
------------------------------------------------
Subtype : IPv4
Address : 10.90.90.90
IF Type : IfIndex
OID : 1.3.6.1.4.1.171.10.102.1.5
Advertising Ports :
Total Entries : 1
DGS-3710-12C:admin#
36-19
show lldp remote_ ports
Description
This command is used to display the information learned from the neighbor parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist>
- (Optional) Specifies the ports to be displayed. When a port list is not specified,
information for all ports will be displayed.