DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
729
Parameters description:
ipaddr: IP address
macaddr: MAC address
portNum : The port number
BPDU Attack
Protection
Event description: BPDU attack happened.
Log Message: Port <portNum> enter BPDU under protection state
(mode: drop | block | shutdown)
Parameters description:
portNum : The port number
drop / block / shutdown: There only one of they in a log entry.
Informational
Event description: BPDU attack automatically recover.
Log Message: Port <portNum > recover from BPDU under protection
state automatically
Parameters description:
unitID: The unit ID
portNum : The port number
Informational
Event description: BPDU attack manually recover.
Log Message: Port <portNum > recover from BPDU under protection
state manually
Parameters description:
unitID: The unit ID
portNum : The port number
Informational
WAC
Event description: When a client host fail to authenticate.
Log Message: WAC unauthenticated user (Username: <string>, IP:
<ipaddr>, MAC: <macaddr>, Port: <portNum>)
Parameters description:
string: Username
ipaddr: IP address
macaddr: MAC address
portNum : The port number
Warning
Event description: This log will be triggered when the authorized user
number reaches the max user limit on whole device. It is based on
per-system.
Log Message: WAC enters stop learning state.
Warning
Event description: This log will be triggered when the authorized user
number is below the max user limit on whole device in a time
interval (interval is project depended). It is based on per-system.
Log Message: WAC recovers from stop learning state.
Warning
LBD
Event Description: Loop back is detected under port-based mode.
Log Message:
Port < portNum> LBD loop occurred. Port blocked.
Parameters Description:
portNum: The port number.
Critical
Event Description: Port loop detection restarted after interval time.
Log Message:
Port< portNum> LBD port recovered. Loop detection restarted
Parameters Description:
portNum: The port number.
Informational
Event Description: Loop back is detected under VLAN-based mode.
Log Message:
Port <portNum> VID <vlanID> LBD loop occurred. Packet discard
begun
Parameters Description:
portNum: The port number.
vlanID: the VLAN ID number.
Critical
Event Description: Port recovered from LBD blocked state under
VLAN-based mode.
Log Message:
Port < portNum> VID <vlanID> LBD recovered. Loop detection
restarted
Parameters Description:
portNum: The port number.
vlanID: the VLAN ID number.
Informational
Traffic Control
Event description: Broadcast storm occurrence.
Log Message: Port <portNum> Broadcast storm is occurring.
Warning