DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
215
Restrictions
Only Administrator-level users can issue this command.
Example
To create a DHCP pool:
DGS-3710-12C:admin#create dhcp pool nyknicks
Command: create dhcp pool nyknicks
Success.
DGS-3710-12C:admin#
19-5
delete dhcp pool
Description
This command is used to delete a DHCP pool.
Format
delete dhcp pool [<pool_name 12> | all]
Parameters
<pool_name 12>
- Specifies the name of the DHCP pool.
all
- Specifies to delete all the DHCP pools.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a DHCP pool:
DGS-3710-12C:admin#delete dhcp pool nyknicks
Command: delete dhcp pool nyknicks
Success.
DGS-3710-12C:admin#
19-6
config dhcp pool network_addr
Description
This command is used to specify the network for the DHCP pool. The addresses in the network
are free to be assigned to the DHCP client. The prefix length specifies the number of bits that
comprise the address prefix. The prefix is an alternative way of specifying the network mask of the
client. The prefix length must be preceded by a forward slash (/). When the DHCP server receives
a request from the client, the server will automatically find a pool to allocate the address. If the