DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
320
DGS-3710-12C:admin#show address_binding ports
Command: show address_binding ports
Port IPv4 IPv6 Mode Zero IP DHCP Packet Stop Learning
State State Threshold/Mode
----- -------- -------- ---- --------- ----------- --------------
1 Disabled Disabled ARP Not Allow Forward 500/Normal
2 Disabled Disabled ARP Not Allow Forward 500/Normal
3 Disabled Disabled ARP Not Allow Forward 500/Normal
4 Disabled Disabled ARP Not Allow Forward 500/Normal
5 Disabled Disabled ARP Not Allow Forward 500/Normal
6 Disabled Disabled ARP Not Allow Forward 500/Normal
7 Disabled Disabled ARP Not Allow Forward 500/Normal
8 Disabled Disabled ARP Not Allow Forward 500/Normal
9 Disabled Disabled ARP Not Allow Forward 500/Normal
10 Disabled Disabled ARP Not Allow Forward 500/Normal
11 Disabled Disabled ARP Not Allow Forward 500/Normal
12 Disabled Disabled ARP Not Allow Forward 500/Normal
DGS-3710-12C:admin#
30-9
show address_binding blocked
Description
This command is used to display address binding information for blocked entries.
Format
show address_binding blocked [all | vlan_name <vlan_name> mac_address <macaddr>]
Parameters
blocked
- (Optional) Specify the address database that system auto learned and blocked.
all
- Specify to display all.
vlan_name
- Specify the VLAN name (the blocked MAC belongs to).
<vlan_name>
- Enter the VLAN name here.
mac_address
- Specify the MAC address.
<macaddr>
- Enter the MAC address here.
Restrictions
None.
Example
To show the IMPB entries that are currently blocked: