DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
421
Format
config mld_snooping data_driven_learning max_learned_entry <value 1-1024>
Parameters
<value 1-1024>
- Specifies the maximum number of groups that can be learned by data driven.
The default setting is 128.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the maximum number of MLD snooping data driven learning entries as 50:
DGS-3710-12C:admin#config mld_snooping data_driven_learning max_learned_entry
50
Command: config mld_snooping data_driven_learning max_learned_entry 50
Success.
DGS-3710-12C:admin#
42-4
clear mld_snooping data_driven_group
Description
This command is used to delete the MLD snooping group learned by data driven.
Format
clear mld_snooping data_driven_group [all | [vlan_name <vlan_name> | vlanid <vlanid_list>]
[<ipv6addr> | all]]
Parameters
all
- Specifies all VLANs to which MLD snooping groups will be deleted.
vlan_name
- Specifies the VLAN name.
<vlan_name>
- Specifies the VLAN name.
vlanid
- Specifies the VLAN ID.
<vlanid_list>
- Specifies a list of the VLAN IDs.
<ipv6addr>
- Specifies the group’s IPv6 address learned by data driven.
all
- Specifies to clear all data driven groups of the specified VLAN.
Restrictions
Only Administrator and Operator-level users can issue this command.