![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-273.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
269
all
- Specifies to configure all ports.
state
- Specifies the port status.
enable
- Enable the state.
disable
- Disable the state.
illegal_server_log_suppress_duration
- Specifies the illegal server log suppression duration.
1min
- Specifies an illegal server log suppression duration of 1 minute.
5min
- Specifies an illegal server log suppression duration of 5 minutes.
30min
- Specifies an illegal server log suppression duration of 30 minutes.
trap_log
- Specifies the trap log status.
enable
- Enable the trap log feature.
disable
- Disable the trap log feature.
Restrictions
Only Administrator-level users can issue this command.
Example
To add an entry from the DHCP server/client filter list in the switch’s database:
DGS-3710-12C:admin#config filter dhcp_server add permit server_ip 10.1.1.1
client_mac 00-00-00-00-00-01 port 1-12
Command: config filter dhcp_server add permit server_ip 10.1.1.1 client_mac 00-
00-00-00-00-01 port 1-12
Success.
DGS-3710-12C:admin#
To configure the filter DHCP server state:
DGS-3710-12C:admin#config filter dhcp_server ports 1-10 state enable
Command: config filter dhcp_server ports 1-10 state enable
Success.
DGS-3710-12C:admin#
26-2
show filter dhcp_server
Description
This command is used to display the DHCP server/client filter list created on the switch.
Format
show filter dhcp_server
Parameters
None.