DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
606
Chapter 61
SSL Commands
download ssl certificate
<ipaddr> certfilename <path_filename 64> keyfilename <path_filename
64>
enable ssl
{ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5 }(1)}
disable ssl
{ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5 }(1)}
show ssl
{certificate}
show ssl cachetimeout
config ssl cachetimeout
<value 60-86400>
61-1
download ssl certificate
Description
This command is used to download a certificate file for the SSL function on the Switch from a
TFTP server. The certificate file is a data record used for authenticating devices on the network. It
contains information on the owner, keys for authentication.
Format
download ssl certificate <ipaddr> certfilename <path_filename 64> keyfilename
<path_filename 64>
Parameters
<ipaddr>
- Specifies the TFTP server IP address.
certfilename
- Specifies the desired certificate file name and the certificate file path in respect to
the TFTP server root path. Input characters with a maximum of 64 octets.
<path_filename 64>
- Specifies the desired certificate file name and the certificate file path in
respect to the TFTP server root path. Input characters with a maximum of 64 octets. The
certificate file name can be up to 64 characters long.
keyfilename
- Specifies the private key file name which accompanies the certificate and the
private key file path in respect to the TFTP server root path. Input characters with a maximum
of 64 octets.
<path_filename 64>
- Specifies the private key file name which accompanies the certificate
and the private key file path in respect to the TFTP server root path. Input characters with a
maximum of 64 octets. The private key file name can be up to 64 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To download a certificate from a TFTP server: