DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
4
command in the CLI has this feature, and complex commands have several layers of parameter
prompting.
In addition, after typing any given command plus one space, users can see all of the next possible
sub-commands, in sequential order, by repeatedly pressing the
Tab
key.
To re-enter the previous command at the command prompt, press the up arrow cursor key. The
previous command will appear at the command prompt.
DGS-3710-12C:admin#config account
Command: config account
Next possible completions:
Option Description
------------------------------------------------------------------------------
<username> The username is between 1 and 15 characters
DGS-3710-12C:admin#
In the above example, the command
config account
was entered without the required parameter
<username>
, the CLI returned the
Next possible completions: <username>
prompt. The up
arrow cursor control key was pressed to re-enter the previous command (
config account
) at the
command prompt. Now the appropriate username can be entered and the
config account
command re-executed.
If a command is entered, that is not recognized by the CLI, the top-level commands will be
displayed under the
Available commands:
prompt.
DGS-3710-12C:admin#the
Available commands:
Option Description
------------------------------------------------------------------------------
.. go to parent directory
? Used to display all commands and specific command usage,
descriptions.
cable_diag cable diagnostic
cfm
clear
config
create
debug
delete
disable
download
enable
login Used to log in a user to the switch's console.
logout Used to log out a user from the switch's console.
no Close IP-MAC Binding debug event and DHCP.
ping Used to test the connectivity between network devices.
ping6